Joined v-belt is two or more equal trapezoidal V-belts placed side by side in a definite distance and joined by a covering band, Cogged banded V belt, and non-cogged V belt can be produced for large drives based on DIN /RMA Standard. Our Banded V Belt for heavy-duty industrial machinery and equipment with high strength, durability, and performance.
• Enhanced power transmission capacity
• High adhesion strength between tie-band and the belts
• Eliminates changes of mismatch in length
• Antistatic, oil and heat resistant
• Manufactured through single-stage curing process
*Sg is standard sheave-groove spacing dimension.
NOMINAL DIMENSIONS OF JOINED V-BELT CROSS-SECTIONS -MILLIMETERS
Belt sizes will be identified by a standard belt number. The first one or two figures of this number followed by the letter N" or NX" indicates the belt cross-section. The remaining figures in the size designation indicate the belt length in millimeters. For example, the number 15N3550 designates a belt with a 15N cross-section and an effective length of 3550 mm.
PROPERTIES AND ADVANTAGES
Joined construction for problem drives
High grade engineered rubber
Longer service life ,Hihger capacity
Temperature range from -50C to + 120C
Static conductive to ISO1813
Oil, heat, ozone, and abrasion-resistant.
Crushers, Screens, Saws, Washers, etc.
Outside fabric: Polyester cotton canvas
Tensile member: Polyester hard cord
Top rubber: CR
Buffer Rubber: CR
Bottom Rubber: CR